What Is Secondary Glazing?
Secondary glazing is a cost-effective method to increase the efficiency of thermal energy and reduce the noise level of single-glazed windows that are already in use. It is more compatible with older properties than primary window replacements because it does not require the removal or modification of the existing frames.
A good company will be able to offer follow-up support following installation. They might even call you after a few weeks to see how things are going. They must also be FENSA accredited and provide an assurance on their products.
The efficiency of thermal energy can be improved
The addition of secondary glazing can reduce heat loss and also reduce drafts. It can also make your home more comfortable and quiet. It is important to understand that this solution is not a substitute for double or triple glazing and will give a slight boost in thermal efficiency.
Glass is not an excellent insulation. However an argon layer or air between two panes can aid in reducing condensation and slowing down the transfer of heat from warm to cool. A layer of insulation between the two panes of glass in a double glazed window will block cold air from getting into your home and will keep warm air inside your property.
There are a variety of systems that can be installed using DIY kits while others require professional installation. There are systems that fit sliding sash windows and other frames that are already in use. Some can be opened and closed while others are fixed to the wall.
The most affordable secondary glazing system is the 'lift-out' model. This is a system that is installed within the window that is already in place and then lifts up from the channel. This is the best option for a sash windows or if access to primary windows is limited.
Depending on the quality of the glazing employed and the type of gap between the primary and secondary windows. Certain products may provide higher insulation levels than other. The greater the distance between two panes is, the better the thermal performance.
In some situations the secondary glazing option can improve the thermal efficiency of a home to a point that it is comparable to the insulation offered by the newer double or even triple-glazed windows. This is particularly true in older properties where planning restrictions restrict the type of replacement windows that can be installed. In these cases, secondary glazing may be the most cost-effective way to seal the frames of sash windows that were previously in use.
Reduced noise
Windows let a lot of noise into a home. This is especially a problem for those who live near railway tracks or flight paths. In these instances upgrading to double glazing will lessen the impact the outside noise can have on a property. However, not everyone wants to or is able to afford the change of all their windows and this is where secondary glazing comes into play. This is when you add an additional window to the existing frame of a home. This'secondary' window provides an additional (sealed), barrier that will help insulate your home from cold air, as well as external noise.
Noise pollution is a real issue and one which can cause long-term health problems if not taken care of. Ecoease offers a low-cost solution to reduce the amount of sound from outside that could enter your home. Our second double glazing is a great alternative for those looking to reduce noise pollution without having to spend an enormous amount to replace their windows.
The main benefit of secondary glazing is that it creates an additional barrier between your home and the outside world, significantly lessening the amount of noise pollution. This is accomplished by putting an additional frame and pane within the window that has an approximate 100mm gap. The secondary window is able to be opened and shut for ventilation, which is not the case with the primary window.
This barrier is also able to insulate the room from cold air that would otherwise escape through the original window and then down the wall. This helps keep the room warm and reduce energy costs.
In addition to this the secondary glazing also helps to reduce the level of noise created by traffic and other external activities. The extra barrier between your house and the outside world is a wonderful comfort and can make a an enormous impact on your daily life.
Another bonus of this system is that it can be fitted to almost any type of window, including awning windows as well as vertical sliding sash windows, and even sliding doors. It can be installed on windows that are single or in multiples throughout a home and is a far cost-effective alternative to replacing all of your windows. It can also keep the appearance of your house and offer an ideal solution for listed homes where changing windows might alter their appearance.
Increased security
Double glazing is typically considered to be a costly option. However, this isn't always the case. It is possible to purchase secondary glazing for a lot less than you think, especially if you consider that it's an effective security option. It's not just an effective barrier, but also provides insulation. This makes it harder for burglars to break through. Instead of replacing your current windows with double glazing, which can be a complex process in many cases and might require planning permission, you can install secondary glazing instead.
Contrary to windows that can be made to suit any house secondary glazing is designed to fit the inside of your existing window frames. It's a simple, cost-effective solution that offers a variety of advantages. Additionally it can increase your property's overall security by reducing the amount of noise that enters your home.
If you are in search of secondary glazing near you, you should consider the quality of products and the service offered by the installers. Ask about their insurance certificates, certifications and warranties. You should also look at how long they've been in operation. Experienced companies can help ensure that the job is done correctly and efficiently.
The main benefit of secondary glazing is that it decreases the loss of heat and enhances draught-proofing by creating a second glass behind the window you already have. This second pane acts as an insulating layer that reduces heat loss and cuts down on noise intrusion. This is a cost-effective option to upgrade your windows without replacing them.
If you reside in an older house with single-glazed windows, then you're probably spending a lot of money on heating and cooling. This is due to the fact that glass is an excellent conductor of heat, meaning that your hot water and electricity are lost through your windows while you're trying to stay warm in the winter.
The best solution to deal with this problem is to consider investing in secondary glazing. This kind of window treatment is cheaper than the installation of a brand new window unit and will offer many advantages, including improved insulation, lower energy bills, and enhanced security. double glazing repair near me can select from a range of styles like hinged units or secondary glazing that opens.
Improved appearance
One of the main concerns of homeowners is the impact that replacing their windows would have on the look of their home. Installing secondary glazing can provide the same thermal efficiency as double glazing without altering the appearance. Installation is much less complicated than replacing original windows, and can be completed much faster.
This involves placing an independent pane on the inside of an existing window. Typically there is a gap between them of around 100 millimeters. The seals made of rubber also help to separate the room from the window, thus reducing sound transmission. It can also be used to improve insulation in period buildings in areas where planning restrictions prevent the use of double-glazed units.
There are a number of different styles of secondary glazing that are available to meet your needs and requirements, from systems that can be opened like windows (hinged secondary glazing) to those that are set within the sash frame and are fixed in place. Certain secondary glazing systems are designed to be as discreet as possible, with frames that are completely hidden and are unobtrusive from the inside. These are useful when regular ventilation is required because opening the sash can create an health and safety risk.
Certain companies offer permanent aluminium secondary glass that can be put on the exterior of your existing windows, resulting in better energy performance and an updated look. This is a viable option for historic or listed buildings. It can also be cost-effective if you're on a budget. You can choose a woodgrain and colour to match your home's style to look like it's always been there.
It is crucial to locate a business that has experience in working on your specific property, and has a positive reputation for customer service. It is also worth looking over reviews on the internet and asking for recommendations from friends and family. Verify if the company is registered with professional associations like the Glass and Glazing Federation.